A4 Mk2
|
|
1 - | Belt buckle |
q | Always renew if belt tensioner was triggered (while belt was fastened) |
– | Remove seat bench (rear): vehicles up to 10.2004 → Chapter, vehicles from 11.2004 onwards → Chapter. |
– | Remove bolt -4- (1x). |
q | Always renew seal -5-. |
q | When fitting, make sure belt buckle and/or lap belt engage(s) in locating studs. |
q | Narrow side of belt buckle and/or lap belt must face in direction of travel. |
2 - | Lap belt |
3 - | Lap belt with retractor |
4 - | Bolt |
q | Tightening torque: 55 Nm |
q | Always use genuine bolt |
5 - | Seal |
q | Always renew |