A4 Mk2
| Unplugging connectors |
| 1 - | Front seat |
| 2 - | Connector for belt buckle sensor (black) |
| 3 - | Connector for seat heating (green) |
| 4 - | Connector for current supply (red) |
| 5 - | Connector for airbag (orange) |
| 6 - | Cover for connector point |
| t | Removing: |
| – | Tilt front seat -1- backwards. |
| – | Lift off cover for connector point -6-. |
| – | Press in tab at airbag connector -5- (tunnel side) and unplug airbag connector -5-. |
| – | Press in tab at current supply connector -4- (tunnel side) and unplug current supply connector -4-. |
| – | Press in tab at seat heating connector -3- (tunnel side) and unplug seat heating connector -3-. |
| Vehicles with buckle sensor: |
| – | Press in tab at belt buckle sensor connector -2- (tunnel end) and unplug belt buckle sensor connector -2-. |
| All vehicles: |
| – | Connect airbag adapter → Chapter. |
| – | Take out front seat -1-. |
| t | Installing: |
| Install in reverse order of removal. |
