A4 Mk2
|
|
|
1 - | Connector (3x) |
2 - | Wiring harness |
t | Removing |
– | Remove seat → Chapter. |
– | Attach seat repair stand -VAS 6136- to engine and gearbox support -VAS 6095-. |
– | Attach front seat to seat repair stand -VAS 6136-. |
– | Remove side trim (sill side) → Chapter. |
– | Remove side trim (tunnel side) → Chapter. |
– | Remove backrest → Chapter. |
– | Remove backrest cover panel → Chapter. |
– | Remove backrest cover and padding → Chapter. |
– | Unfasten cable ties -3- (3x). |
– | Unplug connectors -1- (3x). |
– | Detach wiring harness -2-. |
t | Installing |
Install in reverse order of removal. |
3 - | Cable ties (3x) |