audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing sun visor (centre) > < Roof trim (saloon)
Removing and installing sun visor
Removing and installing sun visor
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1783-
  W00-0990
1 - Sun visor
t  Removing:
–  Disengage sun visor -1- in centre of vehicle from retaining hook -2-.
–  Fold sun visor -1- to one side.
–  Prise out cap -3- at sun visor -1- and slacken off bolt -4-.
–  If fitted, unplug connector for make-up mirror lighting.
–  Detach sun visor -1-.
t  Installing:
Install in reverse order of removal.
2 - Centre bracket for sun visor
3 - Cap
4 - Bolt
q   Tightening torque: 4 Nm
q   Self-locking
q   Always renew after removing
q   Always clean threaded holes for bolts (using a tap for example)

   

Removing and installing sun visor (centre) > < Roof trim (saloon)