A4 Mk2
|
| 1 - | Bolt |
| 2 - | Intake housing |
| q | Not to be further dismantled |
| q | With recirculated-air flap and two air flow/fresh-air flaps |
| 3 - | Holder |
| q | For evaporator refrigerant pipes |
| 4 - | Air duct |
| q | Consists of top and bottom section |
| 5 - | Evaporator |
| q | Check for complete insulation at refrigerant pipes |
| q | Removing and installing → Chapter |
| q | Attaching seal to evaporator → Chapter |
| q | Check type of seal at connections and refrigerant pipes (must be designed for same type of seal) → Chapter and → Parts List |
| q | The evaporator removed contains refrigerant oil which has to be returned to the refrigerant circuit → Air conditioner with refrigerant R134a |
| 6 - | Evaporator seal |
| q | Attaching seal to evaporator → Chapter |
| 7 - | Air distributor housing |
| q | Not to be dismantled |
| q | With temperature flaps and air distributor flaps |
| q | The connecting elements in the air distributor housing between temperature flaps 1 and temperature flaps 2 are visible after detaching the air distributor housing → Chapter. |
| 8 - | Front footwell vents |
| q | Removing and installing → Chapter |