–
| Attach the two coolant pipes -B- and -C- with clips -A- to the heat exchanger. |
–
| Check position of both clips -A-. They must completely surround the flange at the heat exchanger and coolant pipe and not make contact with other components. |
–
| Tighten bolts at clips -A- to 2.5 Nm. |
–
| Make sure coolant hoses are properly connected to heat exchanger. Heed markings: |
A - | Supply from cylinder head |
–
| Re-install components removed (with the exception of driver's storage compartment) in reverse order. |
Note t
| The arrangement of the coolant pipes to the heat exchanger of the air conditioner unit is such that the heat exchanger must also be bled. Proceed as follows: |
t
| - Bleed coolant circuit. |
|
|
|