audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing dust and pollen filter > < Components for control of heater
Heating
Components for control of heater
Components in engine compartment and at rear of vehicle
 
A80-0207
  • Sun roof with solar cells
    • ◆ Checking operation
    • ◆ Removing and installing

=> General Body Repairs, Exterior; Repair Group 60

  • Dust and pollen filter
    • ◆ Removing and installing
      => Page 80-5
    • ◆ Heed replacement intervals

=> Maintenance

    • ◆ Different versions (with/without charcoal filter element => Page 80-6)
  • Heated windscreen control unit
    -J505
    • ◆ Operation => Page 01-283
    • ◆ Deactivation => Page 01-286
    • ◆ Removing and installing

=> Electrical system

=> Current Flow Diagrams, Electrical Fault-finding and Fitting Locations binder

 
A80-0207
  • Ambient temperature sensor -G17
    • ◆ Removing:
    • ‒ Unplug connector at temperature sensor and unclip from mount in air duct

=> General Body Repairs, Exterior; Repair Group 63

    • ◆ Resistance values
    • ◆ Measured value of -G17 is evaluated by control unit in dash panel insert and transmitted via convenience data bus to -E87 (heating)

=> Electrical System; Repair Group 01

 
A80-0207
  • Forced air extraction
    • ◆ Sealing lips of vent frame must move freely and close automatically
    • ◆ To ensure proper functioning of passenger compartment ventilation, air ducts must not be blocked by luggage compartment lining
    • ◆ Checking

Removing and installing dust and pollen filter > < Components for control of heater