Audi Workshop Service and Repair Manuals

Notes:

• ◆ This control motor is only fitted on LHD vehicles.
• ◆ The flaps actuated by this motor are a combined fresh-air and air-flow flap (with RHD, these flaps are actuated by the control motor -V113; there is no air flow control).

Removing

• ‒ Remove glove box.

=> General Body Repairs, Interior; Repair Group 68

• ‒ → Unplug connector -A-.
• ‒ Screw out bolts -B-.
• ‒ Detach control motor.

Installing

Note:

Cam plate at control motor is colour-coded. For control motor -V71 it is light blue.

• ‒ → Insert lug -A- in groove -C- and lug -B- in groove -D- of cam plate (lugs -A- and -B- as well as grooves -C- and-D- have different dimensions).

Note:

On insertion, make sure actuating arms -E- and -F- are correctly positioned on corresponding pivot pins.

Re-install all parts removed in reverse order, paying attention to the following:

• ‒ Lay wiring harness so that it cannot come into contact with moving components (e.g. control motor lever).
• ‒ Interrogate .

Note:

Operation of control motor can be checked in the following manner, for example:

Connect both contacts "5" and "6" in connector of control motor to 12V DC voltage source; control motor moves in one direction as far as stop; interchanging positive and negative alters direction of rotation. Use adapter cable for this purpose => Page 80-28.