A4 Mk2
| Input shaft, pinion shaft and internal selector mechanism - exploded view of components |
| 1 - | Bearing plate |
| q | Servicing → Chapter |
| 2 - | Selector rod for 5th and 6th gear |
| q | Only renew complete with follower for 5th and 6th gear → Item |
| 3 - | Follower for reverse gear |
| q | Pulling out ball sleeve → Fig. |
| q | Driving in ball sleeve → Fig. |
| 4 - | Input shaft |
| q | Dismantling and assembling → Chapter |
| 5 - | Selector fork for 3rd and 4th gear |
| q | Can be renewed individually |
| q | Installation position: rib faces follower |
| 6 - | Selector rod for 3rd and 4th gear |
| q | Only renew complete with follower for 3rd and 4th gear |
| 7 - | Pinion shaft |
| q | Dismantling and assembling → Chapter |
| 8 - | Selector rod for 1st and 2nd gear |
| q | Only renew together with selector fork for 1st and 2nd gear (secured together by means of a pin) |
| 9 - | Follower for 1st and 2nd gear |
| q | Can be renewed individually |
| 10 - | Circlip |
| q | 2 x |
| 11 - | Locking bolts for selector rods |
| q | 4 x |
| q | Fit bolt with sealing paste -AMV 188 001 02- → Anchor |
| q | Tighten to 50 Nm |
