–
| Loosen bolts -arrows- for torque reaction support. |
–
| Allow stop for torque reaction support to settle on rubber buffer for torque reaction support under its own weight and re-tighten bolts. |
The remaining installation steps are carried out in the reverse sequence; note the following points: |
Caution Never use a charger to aid starting. Otherwise, the vehicle's control units could be damaged. |
|
Note t
| Tightening torques apply only to lightly greased, oiled, phosphated or black-finished nuts and bolts. |
t
| Additional lubricant such as engine or gear oil may be used, but do not use graphite lubricant. |
t
| Do not use parts which have been degreased. |
t
| Tolerance for tightening torques is ± 15%. |
|
|
|