A4 Mk2
Exploded view - ATF cooling pipes on vehicles with 3.0 ltr. TDI engine |
1 - | Union nuts, 29 Nm |
2 - | Bolt, 5 Nm |
q | Secures ATF pipes to gearbox |
3 - | Clip |
4 - | Bolts, 8 Nm |
5 - | Bracket |
6 - | Clip |
7 - | Nut, 5 Nm |
8 - | Clip |
9 - | Union nuts, 29 Nm |
10 - | ATF hoses |
q | To cooler |
11 - | Bracket |
12 - | ATF pipe |
q | Inserted into ATF cooler (top) |
q | Before tightening bolt, push in ATF pipe onto stop by hand |
13 - | Bolt, 5 Nm |
q | Before tightening bolt, push in ATF pipes onto stop by hand |
14 - | O-ring |
q | Renew |
q | Lubricate with ATF when fitting |
15 - | ATF pipes |
q | Inserted into ATF cooler (bottom) |
q | Before tightening bolt, push in ATF pipes onto stop by hand |
16 - | O-ring |
q | Renew |
q | Lubricate with ATF when fitting |
17 - | Bolt, 5 Nm |
q | Before tightening bolt, push in ATF pipes onto stop by hand |
18 - | O-rings |
q | Renew |
q | Lubricate with ATF when fitting |
19 - | Bolt, 21 Nm |
q | Before tightening bolt, push in ATF pipes onto stop by hand |
20 - | ATF pipes |
q | Before tightening bolt, push in ATF pipes onto stop by hand |