–
| Remove screw plug -arrow-. |
–
| Check the oil level with a suitable improvised tool, e.g. bent wire. |
l
| Specification: oil level 8.5 mm below bottom lip of oil filler hole. |
–
| Top up gear oil if necessary. |
Caution Risk of damage to the gearbox. |
The two gearbox versions multitronic 01J and 0AN require different types of gear oil. Only the correct type of gear oil for the respective gearbox (available as a replacement part) may be used in the front final drive → Electronic parts catalogue. |
|
Note When servicing at the workshop the oil can also be filled up to the bottom lip of the oil filler hole. However, it will then be necessary to extract 0.2 litre in order to reach the correct oil level. |
–
| Tighten new screw plug. |
|
|
|