l
| The securing bolts -arrows- for the retaining plate are tightened to 30 Nm. |
–
| Install input shaft, shim “S5”, 3rd to 6th gears with roller bearing and bearing mounting -1- → Chapter. |
Note To make it easier to apply the digital depth gauge, the bearing mounting is not in its normal installation position in the illustration. |
–
| Position straightedge -T 40100- onto cleaned joint surface of gearbox housing. |
–
| Measure depth between roller bearing inner race and straightedge using digital depth gauge -2- (e.g. digital depth gauge -VAS 6320-). |
In example: measurement -b- = 172.00 mm. |
–
| Add the height of straightedge -T 40100- to this measurement. |
|
|
|