A4 Mk2
| Coolant hose connection diagram |
| 1 - | Radiator |
| q | Removing and installing → Chapter |
| q | If renewed, refill system with fresh coolant |
| 2 - | Coolant pipe (top) |
| q | Removing and installing → Chapter |
| 3 - | Thermostat housing with map-controlled engine cooling thermostat -F265- |
| q | Removing and installing → Chapter |
| q | Checking thermostat → Chapter |
| 4 - | Coolant pump |
| q | Removing and installing → Chapter |
| 5 - | Cylinder head/cylinder block |
| q | If renewed, refill system with fresh coolant |
| 6 - | Bleed hole |
| 7 - | Heat exchanger |
| q | If renewed, refill system with fresh coolant |
| 8 - | Coolant pipe (bottom) |
| q | Removing and installing → Chapter |
| 9 - | Throttle valve module -J338- |
| q | Heated |
| 10 - | Oil cooler |
| Removing and installing → Chapter „Removing and installing oil filter bracket“ |
| q | If renewed, refill system with fresh coolant |
| 11 - | Expansion tank |
| q | With filler cap |
| q | Checking pressure relief valve in filler cap → |
| 12 - | Intake manifold |
