A4 Mk2
| Diagram of coolant hose connections |
| 1 - | Radiator |
| q | Removing and installing → Chapter |
| q | If renewed, refill system with fresh coolant |
| 2 - | Coolant hose (bottom) |
| 3 - | Coolant pump |
| q | Removing and installing → Chapter |
| 4 - | Thermostat |
| q | Removing and installing → Chapter |
| q | Checking → Chapter |
| 5 - | Oil cooler |
| q | Removing and installing → Chapter |
| q | If renewed, refill system with fresh coolant |
| 6 - | Cylinder head/cylinder block |
| q | If renewed, refill system with fresh coolant |
| 7 - | Connection |
| 8 - | Bleeder hole |
| 9 - | Heat exchanger |
| q | If renewed, refill system with fresh coolant |
| 10 - | Throttle valve module -J338- |
| q | Heated by coolant |
| 11 - | Bleeder screw, 20 Nm |
| 12 - | Expansion tank |
| q | With filler cap |
| q | Checking pressure relief valve in filler cap → Anchor |
| 13 - | Coolant pipe (top) |
| q | Removing and installing → Chapter |
| 14 - | Coolant hose (top) |
