Vehicles with clamps between centre silencer and rear silencer |
Note On vehicles with clamps fitted between centre silencer and rear silencers, it is also necessary to align the centre silencer. |
–
| Loosen bolts on front clamp(s) → Item and rear clamps → Item. |
–
| Push front section of exhaust system towards front of vehicle -arrow-, so that mountings for centre silencer are preloaded by -a- = 5 ... 9 mm. |
–
| Tighten bolts for front clamp(s) → Item evenly to 23 Nm (M8) or 40 Nm (M10). |
|
|
|