audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Enginecrankshaft group, pistons > < Installing engine

A4 Mk2

Securing engine to engine and gearbox support
   
Securing engine to engine and gearbox support
Special tools and workshop equipment required
t  Lifting tackle -2024 A-
t  Engine and gearbox support -VAS 6095- with bracket -VAS 6095/1-5-
t  Workshop hoist -VAS 6100-
t  Lift arm extension (workshop hoist) -VAS 6101-

   
Procedure
l  Engine separated from gearbox.
–  Attach the lifting tackle -2024 A- to engine and workshop hoist -VAS 6100- with lift arm extension (workshop hoist) -VAS 6101- as shown in the illustration.
  Note
To adjust to the centre of gravity of the assembly, the perforated rails of the support hooks must be positioned as shown.
  WARNING
The support hooks and retaining pins on the lifting tackle must be secured with locking pins -arrows-.
  A10-10075
Vehicles with manual gearbox or multitronic gearbox:
–  Unplug electrical connector -1- from engine mounting (right-side).
–  Unscrew bolts -arrows- and remove engine support (right-side).
  A10-10177
All vehicles:
–  Unplug electrical connector -1- from engine mounting (left-side).
–  Unscrew bolts -arrows- and remove engine support (left-side).
  A19-10087
–  Using bracket -VAS 6095/1-5-, secure engine to engine and gearbox support -VAS 6095- as shown in the illustration. Tightening torque: 40 Nm.
  A10-10070

Enginecrankshaft group, pistons > < Installing engine