A4 Mk2
Note
Note
|
|
Item | Bolt 1) | Nm | ||||
1 2) | M10x80 | 65 | ||||
2 2) | M10x100 | 65 | ||||
3, 4, 5, 6 | M12x100 | 65 | ||||
7, 8, 9 | M10x80 | 45 | ||||
A | Dowel sleeves for centralising | |||||
|
|
|
Note
|
|
Platform coordinates | Parts of support set for Audi -VAS 6131/10- | |||||||
B3 1) | /10-1 | /10-4 | /10-5 | /10-11 | ||||
F3 1) | /10-1 | /10-4 | /10-5 | /10-11 | ||||
B10 | /10-1 | /10-2 | /10-5 | /10-8 2) | ||||
G10 | /10-1 | /10-2 | /10-5 | /10-8 2) | ||||
C15 1) | /10-1 | /10-3 | /10-5 | /10-7 | ||||
F15 1) | /10-1 | /10-3 | /10-5 | /10-7 | ||||
D17 1) | /10-1 | /10-3 | /10-5 | /13-2 | ||||
|
|
|
|
Note
|
|
|
|
Note
Note
|
Component | Nm | |
Bolts/nuts | M6 | 9 |
M8 | 20 | |
M10 | 40 | |
M12 | 65 | |
Except for the following: | ||
Terminal B+ to starter | 16 | |
Engine support to cylinder block | 40 | |
Console for engine mounting to longitudinal member | 75 | |
Engine mounting to console for engine mounting | 23 | |
Drive shaft heat shield to gearbox | 23 | |
Torque reaction support to engine | 40 | |
Stop for torque reaction support to lock carrier | 28 | |
Hydraulic pressure line to power steering pump | 47 | |
Fuel hose to fuel line | 22 | |
Hose clips (9 mm wide) | 3 |