Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Checking oil pressure >
< Removing and installing mounting plate for engine oil cooler, pressure control valve and oil filter housing
A4 Mk2
Power unit
6-cylinder TDI engine (2.7 ltr.; 3.0 ltr. 4-valve common rail), mechanics
Engine lubrication / Lubrication system
Removing and installing oil pressure switchF1
Removing and installing oil pressure switchF1
Removing and installing oil pressure switch -F1-
Removing
–
Carefully pull engine cover panel off four retaining pins one after the other
-arrows-
.
–
Detach exhaust gas recirculation valve -N18-
-arrow-
from retainer.
–
Unplug electrical connector
-arrow-
.
–
Unscrew oil pressure switch -F1-.
Installing
Installation is carried out in the reverse order; note the following:
Note
Renew seal.
Tightening torque
Component
Nm
Oil pressure switch -F1- to engine
20
Power unit
6-cylinder TDI engine (2.7 ltr.; 3.0 ltr. 4-valve common rail), mechanics
Engine lubrication / Lubrication system
Removing and installing oil pressure switchF1
Checking oil pressure >
< Removing and installing mounting plate for engine oil cooler, pressure control valve and oil filter housing