A4 Mk2
| Assembly mountings - exploded view |
| 1 - | 46 Nm |
| 2 - | Washer |
| 3 - | Heat shield |
| q | For torque reaction support |
| 4 - | Retainer for torque reaction support |
| 5 - | Compensating plate |
| q | Different thicknesses → Electronic parts catalogue |
| 6 - | 50 Nm + turn 90° further |
| q | Renew |
| 7 - | Washer |
| 8 - | 40 Nm |
| 9 - | 23 Nm |
| 10 - | 75 Nm |
| 11 - | Console for engine mounting (right-side) |
| q | Removing and installing → Chapter |
| 12 - | Engine mounting (right-side) |
| q | Removing and installing → Chapter |
| 13 - | Heat shield |
| q | For engine mounting (right-side) |
| 14 - | 23 Nm |
| 15 - | Engine support (right-side) |
| q | Removing and installing → Chapter |
| 16 - | 40 Nm |
| 17 - | Engine support (left-side) |
| q | Removing and installing → Chapter |
| 18 - | 40 Nm |
| 19 - | 23 Nm |
| 20 - | Heat shield |
| q | For engine mounting (left-side) |
| 21 - | Engine mounting (left-side) |
| q | Removing and installing → Chapter |
| 22 - | Console for engine mounting (left-side) |
| q | Removing and installing → Chapter |
| 23 - | 75 Nm |
| 24 - | 23 Nm |
| 25 - | Washer |
| 26 - | Bracket |
| q | For mounting for torque reaction support |
| 27 - | Mounting for torque reaction support |
| q | Removing and installing → Chapter |
| 28 - | Dowel sleeve |
| q | 2x |
| 29 - | Torque reaction support |
| q | Removing and installing → Chapter |
| 30 - | Bolt |
| q | M8: 23 Nm |
| q | M10: 46 Nm |
