A4 Mk2
| Air cleaner - exploded view |
| 1 - | Change-over flap |
| 2 - | Bolt |
| q | 1.5 Nm |
| 3 - | Air hose |
| q | Check air intake hose for dirt and leaves |
| 4 - | Bolt |
| q | 1.5 Nm |
| 5 - | Air duct |
| q | To lock carrier |
| 6 - | Air duct |
| q | Clipped into air cleaner (bottom section) |
| 7 - | Strainer |
| 8 - | Clip |
| 9 - | Spreader clip |
| 10 - | Bolt |
| q | 1.5 Nm |
| 11 - | Air intake hose leading to throttle valve module -J338- |
| 12 - | Air mass meter -G70- |
| q | Removing and installing → Chapter |
| 13 - | O-ring |
| q | Renew |
| 14 - | Bolt |
| q | 1.5 Nm |
| 15 - | Air cleaner (top section) |
| q | Clean any salt residue, leaves and dirt out of air cleaner (top section) |
| q | Removing and installing → Chapter |
| 16 - | Air filter element |
| q | Always use genuine part for air filter element |
| q | Maintenance intervals → Booklet803 |
| q | Removing and installing → Chapter |
| 17 - | Air cleaner (bottom section) |
| q | Clean any salt residue, leaves and dirt out of air cleaner (bottom section) |
| q | Blow out water drain (small hole) in bottom section of air cleaner with compressed air. |
| q | Removing and installing → Chapter |
| 18 - | Rubber grommet |
| 19 - | Vacuum hose |
