Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Renewing bushes for front and rear upper links >
< Removing and installing mounting bracket
A4 Mk2
Running gear, front-wheel drive and four-wheel drive
Front suspension, drive shafts
Mounting bracket and upper links
Removing and installing upper links
Removing and installing upper links
Removing and installing upper links
Removing
–
Remove suspension strut
→ Chapter
.
–
Loosen nuts
-1-
and take out bolts
-2-
.
–
Take out links
-3-
and
-4-
.
Installing
–
Secure upper links
-3-
and
-4-
with new bolts
-2-
and new nuts
-1-
, but only tighten lightly, so that position of links can still be changed.
Upper link (front)
–
Adjust height
-A-
.
A = 81 mm ± 2 mm
Upper link (rear)
–
Adjust height
-A-
.
A = 70 mm ± 2 mm
Continued for upper links (front and rear)
–
Tighten nuts
-1-
→ Item
.
–
Check positions of upper links.
–
Repeat adjustment if necessary.
–
Re-install mounting bracket
→ Chapter
.
Running gear, front-wheel drive and four-wheel drive
Front suspension, drive shafts
Mounting bracket and upper links
Removing and installing upper links
Renewing bushes for front and rear upper links >
< Removing and installing mounting bracket