audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing power steering pump (vehicles with 4-cyl. engine) > < Removing and installing power steering pump
General notes
General notes
There is no provision for repairing the power steering pump. If problems are reported, trace the fault by means of a pressure test and a leakage test. Renew the power steering pump if there is a fault.
t  Always check steering system for leaks if fluid level is low in reservoir.
t  If leakage is visible at the pipe connections first tighten connections and wipe dry, then check for leaks again.
t  Replacement pumps are not filled with fluid. Therefore it is essential to fill pump with hydraulic fluid and to rotate pump by hand prior to installation. Otherwise pump can be damaged or may be noisy during operation.
   

Removing and installing power steering pump (vehicles with 4-cyl. engine) > < Removing and installing power steering pump