audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Adjusting toe setting at rear wheels > < Checking camber at front wheels and centralising if necessary

A4 Mk2

Adjusting camber at rear wheels
Adjusting camber at rear wheels
   
–  Remove nut -A- on bolt connection between wheel bearing housing and transverse link.
–  Adjust camber by turning eccentric bolt -B-.
  Note
t  The maximum adjustment range is 90° to the left or right of the centre position.
t  For illustration purposes the camber adjustment is shown with the wheel removed.
–  Fit and tighten new nut -A- → Item.
–  Check camber value again after tightening nut -A- → Chapter.
  A44-0130

Adjusting toe setting at rear wheels > < Checking camber at front wheels and centralising if necessary