audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Navigation system RNS-JP4 Japan > < Removing and installing aerial selection control unit J515 (Saloon)

A4 Mk2

Removing and installing aerial selection control unitJ515 (Avant)
Removing and installing aerial selection control unit -J515- (Avant)
–  Switch off all electrical equipment.
–  Remove ignition key.
Removing
–  Remove luggage compartment side trim (left-side) → General body repairs, interior; Rep. Gr.70.
   
–  Unscrew bolts -arrows- (14 Nm) and remove base mounting -1-.
  A91-0609
–  Pull retaining plate -3- out of base retainer.
– 
–  Remove bolts -1- (2 Nm).
–  Unplug connectors at aerial selection control unit -J515--2-.
Installing
–  Installation is performed in reverse sequence.
  A91-0950

Navigation system RNS-JP4 Japan > < Removing and installing aerial selection control unit J515 (Saloon)