Activating/deactivating transport mode of “symphony II+” radio unit |
The transport mode must always be activated before shipping a “symphony II+” radio unit. |
After activation, the internal CD changer drive is in the transport position. |
When renewing a “symphony II+” radio unit, the transport mode must be deactivated after the unit is installed. |
Activating transport mode |
“symphony” radio is installed and connected. |
–
| Press the station buttons 3 and 5 and the TONE button at the same time. |
After approx. 5 seconds “TRANSPORT” will appear in the radio display. |
Deactivating transport mode |
“symphony II+” radio is installed and connected. |
–
| Press the CANCEL button. |
The word “TRANSPORT” will go out in the display. |
Transport mode is deactivated. |
|
|
|