audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing bulb for main beam headlights > < Removing air cleaner housing - vehicles with 6-cyl. petrol engine

A4 Mk2

Renewing bulb for dipped beam headlights
Renewing bulb for dipped beam headlights
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
Headlight (left-side):
–  Remove headlight → Chapter.
Headlight (right-side) - vehicles with 1.8 ltr. turbo engine:
–  Remove air cleaner housing → Chapter.
Right headlight - vehicles with 6-cyl. petrol engine:
–  Remove air cleaner housing → Chapter.
   
Both sides (continued):
–  Release retaining clip -arrow- and detach housing cover for dipped beam from headlight housing.
  A94-10049
–  Detach electrical connector -2- at dipped beam bulb.
–  Disengage retaining clip -1- and take bulb -3- out of housing.
Installing
Installation is carried out in the reverse order; note the following:
–  Fit new bulb in housing; do not touch the glass part of the bulb with bare hands.
–  Secure bulb with retaining clip.
–  Secure housing cover with retaining clip.
  A94-0296

Renewing bulb for main beam headlights > < Removing air cleaner housing - vehicles with 6-cyl. petrol engine