Audi Workshop Service and Repair Manuals > A4 Mk2 > Vehicle electrics | Electrical system | Lights, lamps, switches outside | Steering column switch module | Removing and installing intermittent wiper switch E22

Removing and installing intermittent wiper switchE22

Removing and installing intermittent wiper switch -E22-

Removing

–	Remove steering column switch module → Chapter.

Note

Return ring with slip ring must be removed/installed in centre position (wheels in straight ahead position).

–	Carefully release retaining hooks -arrows-.

–	Detach return ring with slip ring -2- with steering angle sender -G85--item 1- from steering column switch module.

–	Unscrew bolts -1- and -2-.

–	Detach intermittent wiper switch -E22--Item 3- from steering column switch module -arrow-.

Installing

Further installation is carried out in the reverse order; note the following:

–	Make sure all fasteners and the electrical connectors are properly engaged.

–	Install steering column switch module → Anchor.

Tightening torque

Component	Nm
Intermittent wiper switch -E22- to steering column electronics control unit -J527-	0.65

Audi Workshop Service and Repair Manuals