audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Renewing wiper blade > < Removing and installing wiper arm

A4 Mk2

Adjusting wiper arm
Adjusting wiper arm
   
Procedure
–  Apply wiper arm with wiper blade fitted at wiper shaft and align wiper blade on rear window as follows.
l  Dimension -a- = 15 ... 20 mm
  Note
The dimension indicates distance between tip of wiper blade and bottom edge of window.
–  Switch on ignition.
–  Actuate rear wiper and allow wiper arm to move to end position.
–  Check setting of wiper arm again. Correct as necessary.
Tightening torque
  A92-0080
ComponentNm
Wiper arm to wiper shaft12

   

Renewing wiper blade > < Removing and installing wiper arm