A4 Mk3
| Removing and installing rear lid |
| 1 - | Gas strut |
| q | Damping element must be engaged on body. |
| 2 - | Rear lid hinge |
| q | Removing → Chapter |
| 3 - | Motor in rear lid control unit -V375- |
| 4 - | Rear lid |
| q | Removing: |
| q | Remove rear lid trim. → Rep. gr.70 |
| q | Unplug electrical connectors and disconnect hose for rear window washer system. |
Note| On vehicles with electric rear lid operation, the corresponding motors for rear lid operation must be removed → Chapter. |
| q | A second person is required to support and lift off the rear lid. |
| q | Detach gas struts from rear lid. |
| q | Unscrew bolts from hinge on rear lid (left and right). |
| q | Lift off rear lid. |
| 5 - | Cover |
| 6 - | Rear lid lock |
| q | Removing → Chapter |
| 7 - | Cover |
| 8 - | Nuts |
| q | 21 Nm |
| 9 - | Seal |
| 10 - | Adjusting buffer |
| q | Adjusting → Anchor |
| 11 - | Bolts |
| q | 8 Nm |
| 12 - | Striker |
| q | Note different versions. |
| 13 - | Nut |
| q | 21 Nm |
| 14 - | Stop |
| 15 - | Bolt |
| q | 8 Nm |
