A4 Mk3
Exploded view of curtain airbag |
1 - | Curtain airbag |
q | Driver side: with driver side curtain airbag igniter -N251- |
q | Passenger side: with front passenger side curtain airbag igniter -N252- |
WARNING
|
q | Removing and installing → Chapter |
2 - | Nut |
q | At earth stud |
q | 9 Nm |
3 - | Nut |
q | At earth stud |
q | Two earth wires are secured additionally on right side of vehicle |
q | 9 Nm |
4 - | Electrical connector |
q | For driver side curtain airbag igniter -N251-/front passenger side curtain airbag igniter -N252- |
q | Unplugging and plugging in → Anchor |
5 - | Retaining clip |
q | Removing and installing → Anchor |
6 - | Clip |
q | 1x or 2x (depending on equipment version) |
q | Renew |
q | If a clip and double-sided adhesive tape were used to attach airbag at factory, use two clips when reinstalling → Electronic parts catalogue |
7 - | Bolt |
q | Self-locking |
q | Always renew after removing |
q | Always clean threaded holes for bolts using e.g. a thread tap |
q | 3.5 Nm |