A4 Mk3
| Exploded view of three-point seat belt (front) |
| 1 - | Bolt |
| q | Renew bolt if removed following an accident |
| q | 45 Nm |
| 2 - | Automatic belt retractor |
| q | Driver side: with driver seat belt tensioner igniter 1 -N153- and driver side belt force limiter -G551- |
| q | Passenger side: with front passenger seat belt tensioner igniter 1 -N154- and front passenger side belt force limiter -G552- |
| q | Removing and installing → Chapter |
| 3 - | Bolt |
| q | Always renew after removing |
| q | 5 Nm |
| 4 - | Belt guide (front) |
| q | Removing and installing → Chapter |
| 5 - | Belt end fitting (front) |
| q | Removing and installing → Chapter |
| 6 - | Bolt |
| q | Renew bolt if removed following an accident |
| q | 45 Nm |
| 7 - | Belt guide fitting |
| 8 - | Bolt |
| q | Renew bolt if removed following an accident |
| q | 27 Nm |
| 9 - | Belt height adjuster |
| q | Removing and installing → Chapter |
| q | Always renew if belt tensioner has been triggered (while belt was fastened) |
| 10 - | Electrical connector |
| q | For driver side belt force limiter -G551- |
| q | For front passenger side belt force limiter -G552- |
| q | Unplugging and plugging in → Chapter |
| 11 - | Electrical connector |
| q | For driver seat belt tensioner igniter 1 -N153- |
| q | For front passenger seat belt tensioner igniter 1 -N154- |
| q | Unplugging and plugging in → Chapter |
