audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing belt buckle (rear right) with centre belt end fitting (rear) > < Exploded view of belt buckle (rear)

A4 Mk3

Removing and installing belt buckle (rear, left-side)
Removing and installing belt buckle (rear, left-side)
   
Removing
–  Remove seat bench → Chapter.
–  Unscrew bolt -3- and detach belt buckle -1- with cover -2-.
Installing
–  Renew bolt for belt buckle.
–  Insert bolt -3- in belt buckle -1-.
–  Slide seal over bolt thread from below.
Perform remaining installation steps in reverse order of removal; observe the following:
–  Align belt buckle with direction of travel when bolting on.
l  Recesses -arrows- at buckle attachment surface must be positioned over locating element on floor panel.
Tightening torque → Chapter
  A69-10383

Removing and installing belt buckle (rear right) with centre belt end fitting (rear) > < Exploded view of belt buckle (rear)