audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exploded view of torsion bar > < Removing and installing seat rake adjuster

A4 Mk3

Removing and installing seat rake adjustment handle
Removing and installing seat rake adjustment handle
  Note
Removal and installation can be carried out with the front seat installed.
   
Removing
–  Remove trim (sill side) → Chapter.
–  Working from rear, lever handle -2- off seat rake adjuster -1-; to do so, press down locking spring of clip with a screwdriver.
  A72-10748
Installing
Installation is carried out in the reverse order; note the following:
–  Renew retaining clip at seat rake adjustment lever. When doing so, observe correct installation position.
–  Make sure seat rake adjustment handle engages properly with retaining clip.
l  Springs -arrows- (2x) of retaining clip -2- must be located on inside of lever -1-.
  A72-10749

Exploded view of torsion bar > < Removing and installing seat rake adjuster