–
| Disengage piping -1- all around seat bench frame -2-. |
–
| Detach cover with padding -3- and -4- from seat bench frame -2-. |
Installation is carried out in the reverse order; note the following: |
–
| Start at rear centre when engaging cover in channel of centre storage compartment. |
–
| When doing so, align cover piping with centre storage compartment and then clip cover into channel of centre storage compartment. |
–
| Proceed in a similar manner with the side cover. |
–
| Make sure there are no creases in the covers attached to the centre storage compartment. |
|
|
|