audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Rear lid trim panels - Avant > < Removing and installing retainer (rear)

A4 Mk3

Removing and installing lining for spare wheel well
Removing and installing lining for spare wheel well
Special tools and workshop equipment required
   
t  Removal wedge -3409-
  W00-0016
Removing
–  Remove luggage compartment floor (rear).
–  Remove spare wheel.
–  Take out mounting -2- for vehicle tool kit.
–  If installed, remove subwoofer -3- → Rep. gr.91.
–  If fitted, unscrew nuts -5- and -6- and remove mounting for towing bracket -4-.
–  Pull lining -1- for spare wheel well out from underneath luggage compartment floor from the side and the front and lift out.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert lining -1- for spare wheel well.
–  Slightly lift luggage compartment floor at side and front using removal wedge -3409- and slide in lining.
Tightening torque → Fig.
  A70-10873

Rear lid trim panels - Avant > < Removing and installing retainer (rear)