audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Engine data > < Removing and installing Hall senderG40
Engine number
Engine number
   
t  The engine number („Engine code“ and „Serial number“) -arrow- can be found on the left side (seen in the direction of travel) at the joint between engine and gearbox.
t  Additionally there is a sticker on the toothed belt cover showing the „engine code“ and „serial number“.
t  Starting with the letter „C“, the engine codes consist of 4 letters.
t  The first 3 characters of the engine code stand for the engine capacity and the mechanical construction and design. They are stamped on the cylinder block, together with the serial number.
t  The 4th character indicates the power output and torque of the engine, and is determined by the engine control unit.
  Note
t  The 4-character engine code can be found on the type plate (in versions for some countries only) and on the vehicle data sticker and the engine control unit.
t  Fitting locations of the type plate for the Audi A5 Coupé (certain countries only) and the vehicle data sticker → Booklet811.
t  Fitting locations of the type plate for the Audi A4 (certain countries only) and the vehicle data sticker → Booklet812.
t  Fitting locations of the type plate for the Audi A5 Cabriolet (certain countries only) and the vehicle data sticker → Booklet818.
  A10-1674

Engine data > < Removing and installing Hall senderG40