–
| Disconnect crankcase breather hose -arrow- by pressing release tabs. |
–
| Remove bolts in the sequence -12 ... 1- and remove cylinder head cover (left-side). |
Caution Risk of violating emission legislation applying to USA models. |
Do NOT open hose connection -arrow-. |
|
–
| Remove bolts in the sequence -12 ... 1- and move cylinder head cover (left-side) clear to one side with crankcase breather hose -arrow- still connected. |
Installation is carried out in the reverse order; note the following: |
Note t
| Renew gasket for cylinder head cover if damaged. |
t
| Renew bolts for cylinder head cover if seals on bolts are damaged. |
–
| Clean surfaces; they must be free of oil and grease. |
–
| Tighten bolts for cylinder head cover (left-side) → Fig.. |
|
|
|