audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Poly V-belt drive for vehicles with electromechanical power steering - exploded view > < Removing and installing poly V-belt - vehicles with hydraulic power steering

A4 Mk3

Removing and installing tensioner for poly V-belt - vehicles with hydraulic power steering
Removing and installing tensioner for poly V-belt - vehicles with hydraulic power steering
   
Removing
–  Lift off engine cover panel (front) -1-.
  A10-11070
–  Remove bolt -2- for coolant pipe (front left).
  Note
t  For illustration purposes, the installation position is shown with the engine removed.
t  Disregard -item 1-.
  A19-10917
–  Remove front noise insulation -1- → Rep. gr.66.
  A10-11071
Vehicles with coolant pipes (front left) (version 1):
–  Remove bolts -2- for coolant pipes (front left).
  Note
t  For illustration purposes, the installation position is shown with the engine removed.
t  Disregard -items 1, 3-.
  A19-10509
Vehicles with coolant pipes (front left) (version 2):
–  Remove bolt -1- for coolant pipes (front left).
  Note
t  For illustration purposes, the installation position is shown with the engine removed.
t  Disregard -arrows-.
  A19-10749
All vehicles (continued):
–  To slacken poly V-belt turn tensioner in clockwise direction -arrow-.
–  Remove poly V-belt from tensioner and release tensioner.
  A13-10650
–  Detach cover and remove bolt -1- behind it.
–  Detach poly V-belt tensioner -2- from cylinder block.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Poly V-belt drive for vehicles with hydraulic power steering - exploded view“
–  Install poly V-belt → Chapter.
–  Install coolant pipes (front left) → Chapter.
  A13-10516

Poly V-belt drive for vehicles with electromechanical power steering - exploded view > < Removing and installing poly V-belt - vehicles with hydraulic power steering