audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing temperature regulator for engine oil cooler > < Removing and installing engine oil cooler

A4 Mk3

Removing and installing mounting plate for engine oil cooler and coolant shut-off valve
Removing and installing mounting plate for engine oil cooler and coolant shut-off valve
   
Removing
–  Remove engine oil cooler → Chapter.
–  Remove bolts -arrows-.
–  Move coolant shut-off valve -1- to one side and detach mounting plate for engine oil cooler and shut-off valve.
–  Unplug electrical connector -arrow- on oil pressure switch.
–  Remove bolts -arrows-.
–  Detach mounting plate for engine oil cooler and coolant shut-off valve
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Engine oil cooler - exploded view“
  Note
Renew seals and/or gaskets.
–  Install engine oil cooler → Chapter.
  A17-10633

Removing and installing temperature regulator for engine oil cooler > < Removing and installing engine oil cooler