audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing charge air cooler > < Charge air cooler - exploded view

A4 Mk3

Removing and installing charge pressure senderG31 / intake air temperature senderG42
Removing and installing charge pressure sender -G31- / intake air temperature sender -G42-
Removing
–  Remove front wheel (left-side) → Wheels and tyres; Rep. gr.44.
–  Remove front left wheel housing liner → Rep. gr.66.
   
–  Unplug electrical connector -1-.
–  Remove bolts -2- and pull charge pressure sender -G31-/intake air temperature sender -G42- out of air pipe.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Charge air cooler - exploded view“
  Note
Fit new O-ring.
–  Install front left wheel housing liner → Rep. gr.66.
–  Fit front wheel (left-side) → Wheels and tyres; Rep. gr.44.
  A21-10229

Removing and installing charge air cooler > < Charge air cooler - exploded view