Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
4-cylinder TDI engine (2.0 ltr. 4-valve common rail - generation II), mechanics >
< Removing and installing Hall senderG40
A4 Mk3
Power unit
TDI injection and glow plug system (4-cyl. 2.0 ltr. 4-valve common rail, generation II)
Ignition system, glow plug system / Glow plug system
Removing and installing engine speed senderG28
Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Special tools and workshop equipment required
t
Assembly tool -T10118-
Removing
–
Remove pump for exhaust gas recirculation cooler -V400-
→ Rep. gr.19
.
–
Unplug electrical connector
-1-
at engine speed sender -G28- using assembly tool -T10118-.
–
Move wiring clear.
–
Remove bolt from engine speed sender -G28-.
Installing
Installation is carried out in the reverse order; note the following:
–
Install pump for exhaust gas recirculation cooler -V400-
→ Engine, mechanics; Rep. gr.19
.
l
Tightening torque
→ Chapter
Power unit
TDI injection and glow plug system (4-cyl. 2.0 ltr. 4-valve common rail, generation II)
Ignition system, glow plug system / Glow plug system
Removing and installing engine speed senderG28
4-cylinder TDI engine (2.0 ltr. 4-valve common rail - generation II), mechanics >
< Removing and installing Hall senderG40