audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Checking delivery pressure of power steering pump (vehicles with 6-cylinder TFSI engine, vehicles with and without dynamic steer > < Exploded view (vehicles with 6-cylinder TFSI engine, vehicles without dynamic steering)

A4 Mk3

Exploded view of pipes and hoses (vehicles with 6-cylinder TFSI engine, vehicles with and without dynamic steering)
Exploded view of pipes and hoses (vehicles with 6-cylinder TFSI engine, vehicles with and without dynamic steering)
   
Exploded view of mounting parts for pipes and hoses
1 - Bracket for reservoir to body → Fig.
2 - Reservoir in bracket → Fig.
3 - Bolt in bracket → Fig.
4 - Hydraulic fluid cooler to condenser → Fig.
5 - Power steering pump in bracket with regulating valve for power steering pump -(V119)- → Anchor or without regulating valve for power steering pump -(V119)- → Anchor
6 - Pressure line to cross brace → Fig.
7 - Installation position of pressure line connection → Fig.
8 - Pressure line to engine mounting → Fig.
9 - Return line to subframe → Fig.
10 - Retainers securing return line to longitudinal member → Fig. or → Fig.
  A48-10423
Bracket for reservoir to body
–  Secure bracket -2- to body with bolts -1-.
–  Secure reservoir -4- in bracket -2- with bolt -3-.
  A48-10401
Reservoir in bracket
–  Fit reservoir (insert lug -1- into recess in bracket -2-).
  A48-10360
Hydraulic fluid cooler to condenser
–  Position hydraulic fluid cooler -1- on retainers -2- and then engage in retainers -3-.
Hoses to hydraulic fluid cooler → Chapter
  A48-10495
Pressure line to cross brace
–  Bolt pressure line with nut -3- and rubber mounting -4- onto cross brace.
–  Note correct position of line when connecting. Markings -1- and -2- must be aligned.
  A48-10429
Pressure line to engine mounting
–  Route pressure line -4- between connecting element -2- and engine mounting -3-.
–  Screw retainer -5- to stud -1- with nut -6-.
  A48-10444
Retainers securing return line to longitudinal member (vehicles without dynamic steering)
–  Fit clips -5- of return line -1- onto studs -2- on longitudinal member.
–  Insert return line -1- with colour markings -arrows- into clips -5-.
–  Secure retainer -4- of return line -1- to front left of subframe -3-.
  A48-10427
Retainers securing return line to longitudinal member (vehicles with dynamic steering)
–  Fit retaining plate of return line -1- onto studs of longitudinal member and tighten nuts -2-.
–  Secure retainer -3- of return line -1- to front left of subframe.
  A48-10609
Return line to subframe
–  Attach return line -4- with bracket -2- and bolt -1- to subframe -3-.
  A48-10428

Checking delivery pressure of power steering pump (vehicles with 6-cylinder TFSI engine, vehicles with and without dynamic steer > < Exploded view (vehicles with 6-cylinder TFSI engine, vehicles without dynamic steering)