audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Cigarette lighter, electric socket > < Removing and installing ambient temperature sensorG17 - vehicles from model year 2013 onwards

A4 Mk3

Removing and installing radio-controlled clock receiverJ489
Removing and installing radio-controlled clock receiver -J489-
   
Removing
–  Remove rear bumper cover → Rep. gr.63.
–  Remove bolts -arrows- and detach radio-controlled clock receiver -J489--item 2-.
–  Unplug electrical connector -1- at radio-controlled clock receiver -J489-.
Installing
l  Tightening torque → Chapter
Installation is carried out in the reverse order; note the following:
–  Install rear bumper cover → Rep. gr.63.
Lane change assist control unit -J769-/-J770- must be recalibrated whenever bumper cover has been removed → Chapter „Calibrating lane change assist - test equipment layout“.
  A90-10075

Cigarette lighter, electric socket > < Removing and installing ambient temperature sensorG17 - vehicles from model year 2013 onwards