A4 Mk3
| Calibrating lane change assist - test equipment layout |
| 1 - | Spacing laser -VAS 6350/2- |
| q | For distance measurement |
| q | For use refer to → operating instructions |
| 2 - | Calibration unit -VAS 6350- |
| 3 - | Spirit level |
| q | On calibration unit -VAS 6350- |
| q | For checking horizontal position of calibration unit -VAS 6350- |
| 4 - | Locating bracket |
| q | For mounting spacing laser -VAS 6350/2- for distance measurement |
| q | Distance to wheel centre mountings -VAS 6350/1- on rear wheels: dimension -a- = 1,700 ± 2 mm |
| 5 - | Wheel centre mounting -VAS 6350/1- |
| q | With wheel bolt adapter (19 mm) and measuring paddle |
| 6 - | Logo |
| q | Laser pointer is aligned with centre of logo |
| 7 - | Calibration unit for lane change assist -VAS 6350/4- |
| q | Is moved from one side of measuring field to other during calibration |
| q | Voltage supply must be connected to bottom left of calibration unit for lane change assist (in direction of travel) |
| 8 - | Measuring scale |
| q | For positioning the calibration unit for lane change assist -VAS 6350/4- |
| 9 - | Linear laser -VAS 6350/3- |
| q | With „laser protection goggles“ |
| q | On calibration unit -VAS 6350- |
| q | Switching on and off → Operating instructions |
| 10 - | Plastic foot |
| q | 3x |
| q | Adjustable, for aligning horizontal position of calibration unit -VAS 6350- |
