A4 Mk3
Exploded view of bi-xenon gas discharge headlight with cornering light |
Part 1 |
1 - | Headlight washer jet |
2 - | Bolt |
q | Tightening torque → Chapter |
3 - | Bracket |
q | Exploded view → Chapter |
4 - | Breather |
q | For headlight housing |
5 - | Bolt |
q | Tightening torque → Chapter |
6 - | Bolt |
q | Tightening torque → Chapter |
7 - | Breather hose |
q | Exploded view → Chapter |
8 - | Output module |
q | Only on vehicles with cornering light |
q | Output module for left headlight -J667- |
q | Output module for right headlight -J668- |
q | Removing and installing → Chapter |
9 - | Bracket for headlight housing |
10 - | Bolt |
q | 1.8 Nm |
11 - | Seal |
12 - | Gas discharge bulb control unit |
q | Left gas discharge bulb control unit -J343- |
q | Right gas discharge bulb control unit -J344- |
q | Removing and installing → Chapter |
13 - | Bolt |
q | 1.4 Nm |
14 - | Bolt |
q | 1.4 Nm |
15 - | LED module for daytime running light and side light |
q | Left LED module for daytime running light and side light -L176- |
q | Right LED module for daytime running light and side light -L177- |
q | Removing and installing → Chapter |
16 - | Front turn signal bulb |
q | Front left turn signal bulb -M5- |
q | Front right turn signal bulb -M7- |
q | 12 V, 21 W (H21W) |
q | Renewing bulbs → Chapter |
17 - | Bolt |
q | 4.5 Nm |
18 - | Stop bolt |
19 - | Bracket for headlight housing |
20 - | Bolt |
q | 4.5 Nm |
21 - | Speed nut |
22 - | Gas discharge bulb |
q | With integrated starter unit |
q | Left gas discharge (xenon) bulb -L13- |
q | Right gas discharge (xenon) bulb -L14- |
q | 42 V, 35 W (D3S) |
q | Renewing bulbs → Chapter |
23 - | Housing cover |
q | For dipped beam headlights |
24 - | Headlight housing |
q | The daytime running light and side light bulbs (LED lights) are integrated in the headlight housing. The LED lights cannot be renewed separately; the headlight must be renewed as a complete unit |
q | USA vehicles: The front side marker light bulb (LED) is integrated in the headlight housing. The LED light cannot be renewed separately; the headlight must be renewed as a complete unit |
q | Removing and installing → Chapter |
25 - | Bolt |
q | 1.4 Nm |
26 - | Bolt |
q | Tightening torque → Chapter |
27 - | Speed nut |
28 - | Bolt |
q | Tightening torque → Chapter |
29 - | Speed nut |
30 - | Mounting |
q | Exploded view → Chapter |
31 - | Bolt |
q | Tightening torque → Chapter |
32 - | Bolt |
q | Tightening torque → Rep. gr.69 |
33 - | Crash sensor for front airbag |
q | Removing and installing → Rep. gr.69 |
Part 2 - repair kits |
1 - | Headlight housing |
q | Removing and installing → Chapter |
2 - | Headlight range control motor |
q | Left headlight range control motor -V48- |
q | Right headlight range control motor -V49- |
q | Removing and installing → Chapter |
3 - | Seal |
q | Not available as individual replacement part |
4 - | Housing cover for control motor |
q | Combined with headlight housing as original equipment. Renew separately when performing repair work; repair kit → Electronic parts catalogue |
q | Removing and installing → Chapter „Removing and installing headlight range control motor -V48-/-V49- - vehicles up to model year 2012“ |
5 - | Bolt |
q | From repair kit for cover for headlight range control motor |
q | 2 Nm |
6 - | Bolt |
q | 1.4 Nm |