A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-2941002.png)
1
Upper D-pillar Trim
‹› Removal:
-
Remove upper A-pillar trim. Refer to => [ Upper A-Pillar Trim ] See: Upper A-Pillar Trim.
-
Fold down roof grab handle - 5 -.
-
Fold down lid - 4 - above bolts - 6 - on roof grab handle - 5 -.
-
Remove two bolts - 6 -.
-
Remove upper D-pillar trim - 1 - from upper B-pillar trim.
-
Remove roof end. Refer to => [ Roof Panel ] See: Roof Panel.
-
Unclip three clips - 2 - at D-pillar trim - 1 -.
-
Remove upper D-pillar trim - 1 - from rear shelf.
-
Remove D-pillar trim - 1 -.
‹› Installing:
CAUTION!
Always follow installation sequence for D-pillar trim.
‹› If the front and rear roof grab handles have been removed, make sure to use the roof grab handle with clothing hook when installing D-pillar trim.
-
Guide D-pillar trim - 1 - first to the rear into rear shelf.
