A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Trim Panel: Service and Repair
Lower B-Pillar Trim
Lower B-Pillar Trim
1
B pillar Trim
‹› Removal:
‹› for removing the lower B-pillar trim, the outer seatbelt anchoring point must not be removed.
-
Unclip lower A-pillar trim at rear end. Refer to => [ Lower A-Pillar Trim ] See: Lower A-Pillar Trim.
-
Remove upper B-pillar trim. Refer to => [ Upper B-Pillar Trim ] See: Upper B-Pillar Trim.
-
Unclip lower clip - 2 - at rear end of B-pillar trim - 1 -.
-
Pull lower B-pillar trim - 1 - upward until B-pillar trim disengages from belt guide - 4 -.
‹› Installing:
‹› Ensure that the belt webbing - 3 - is not jammed when installing trim.
-
Guide pin - 5 - into hole on shell construction sill.
-
Attach upper trim - 1 - to belt guide - 4 -.
-
Secure lower rear trim - 1 - with clip - 2 -.