A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
Trim Panel: Service and Repair
Upper A-Pillar Trim
Upper A-pillar Trim
1 - Upper A-pillar trim
‹› Removing
-
Remove the wind protection trim. Refer to => [ Wind Deflector Trim ] See: Service and Repair/Removal and Replacement/Wind Deflector Trim.
-
Remover the lower A-pillar trim at the top.
-
Pry off the upper A-pillar trim - 1 - at the clips - 2 - (Qty. 2).
-
Remove the upper A-pillar trim - 1 -.
‹› Removing
-
When installing, make sure the rubber door seal is clean and is pulled over the top of the A-pillar trim - 1 -.
-
Install the upper A-pillar trim - 1 - in reverse order of removal.
2 - Clips (Qty. 3)