A4 Quattro Cabriolet L4-2.0L Turbo (BWT) (2009)
/Page-3008005.png)
-
Install the new bracket - 1 -.
-
The toothed gear - 2 - must be horizontal when installed.
-
The part - 4 - must fit into the lower guide rails - 3 - on the rubber buffers.
-
Be careful not to press the micro switch on the right side. When doing this, pull the part - 4 - upward slightly.
-
Press the part - 4 - downward again.
-
When folding it together, the toothed gear - 5 - must be horizontal. Fold the parts together in the lowest position.
-
Push the outer part of the guide rail - 3 - upward and lock the protrusions.
-
Remaining installation is in reversed sequence.
